Home » Automobile engg » Magneto Ignition System: Diagram, Parts, Working – PDF

Magneto Ignition System: Diagram, Parts, Working – PDF

In this article, you’ll learn what is a Magneto Ignition System. Its working, parts, advantages, disadvantages, and uses all are explained with pictures.

Also, you can download the PDF file at the end of this article.

What is a Magneto Ignition System?

The magneto ignition system changed internal combustion engines by producing high-voltage sparks without the need for external electrical sources. It means a battery is not needed for this system. It creates the primary voltage on its own.

Since the magneto generates the electric current required for it, the starting quality of the spark is poor due to the low-speed efficiency, but as the engine speed rises, the spark quality will improve.

This clever design rotates a permanent magnet inside a coil assembly to create a continuous flow of energy using the principles of electromagnetic induction.

It is used in early cars and airplanes, where a revolving magnet creates electrical pulses that ignite the fuel-air mixture.

This system is widely utilized in mopeds, scooters, wheelers, motorcycles, stationary engines, and aviation reciprocating engines.

Read Also: What is a Ignition System in a Car?

Parts of Magneto Ignition System

The magneto ignition system’s main parts are as follows:

#1 Rotating Magnets

The magnets that replace the battery and ignition coil include a four-pole magnet, two-pole shoes, and main and secondary coils.

When the magnet spins, the magnetic flux passing through the coil’s soft iron core reverses direction. It causes the primary and secondary coils’ voltage to act as an inductor.

#2 Primary Winding and Secondary Winding

The primary winding receives power from the source and is typically more in number. The secondary winding transfers energy from the transformed or modified voltage to the load.

#3 Fixed Armature

A fixed armature delivers an AC (alternating current).

#4 Condenser

The condenser discharges into the primary circuit, causing the magnetic flux to change rapidly. This rapid change in magnetic flux induces a very high voltage in the secondary coil, which is sufficient to produce a spark, discharge, and ignite the fuel-air mixture.

#5 Breaker Points

The rate of change of magnetic flux is increased by the condenser and the breaker points. When the cam located on the rotor shaft opens the breaker points, the primary coil’s currents charge the condenser.

#6 Capacitor

The capacitor utilized in the magneto ignition system is a basic capacitor composed of two metal plates separated by an insulating layer. Air is used most of the time, however premium insulating material is employed in some situations.

#7 Distributor

The distributor is a revolving shaft that is enclosed and has ignition that is timed automatically.

The primary job of the distributor is to direct secondary voltage from the ignition coil to the spark plug in the proper sequence and for the appropriate length of time.

#8 Spark Plug

It serves as a spark plug for the fuel-air combination. Thus, the spark plug transmits electrical energy to the fuel mixture, causing it to ignite and producing a power stroke.

Read Also: Different Types of V Engines Explained

Working of Magneto Ignition System

This ignition system works on the same concept as a coil or battery ignition system, except instead of using a battery, it generates energy through a magneto.

magneto ignition system

The magneto begins to rotate as soon as the engine starts, producing high-voltage energy. The ignition capacitor is linked in parallel to one end of the magneto, which is grounded via a contact breaker.

A cam controls the contact breaker, and when it opens, current passes through the condenser to charge it.

Because the condenser serves as a charger, its primary current flow decreases. This lowers the system’s total magnetic field, which raises the condenser’s voltage.

Through the distributor and the proper spark plug, the increased high voltage in the condenser creates an EMF (electromagnetic force) that ignites the spark.

In the beginning, the voltage generated by the magneto is low. However, as the engine’s rotating speed increases, so does the voltage generated by the magneto and the current flow.

A battery or external source can speed up engine kickstarting and prevent sluggish engine starts.

Types of Magneto Ignition Systems

The following are the types of magneto ignition systems:

  1. Rotating Armature or Rotating Magnet Type
  2. Rotating Coils Type
  3. Polar Inductor Type

#1 Rotating Armature or Rotating Magnet Type

The primary and secondary windings serve as the armature. All of them revolve around a stationary magnet’s poles.

#2 Rotating Coils Type

The winding remains stationary while the magnet rotates.

#3 Polar Inductor Type

In the polar inductor type, both magnets and windings remain stationary, but voltage is generated by reversing the flux field with the help of inductors.

Read Also: Types of Suspension Systems and Their Applications

Advantages of Magneto Ignition System

The following are the main advantages of the magneto ignition system:

  1. The magneto ignition system is more reliable because it doesn’t require external power sources. After all, there are no cords to connect to a battery.
  2. The magneto ignition system ensures that the engine can be started even in the absence of an extra battery because, in contrast to coil ignition devices, it does not require a battery.
  3. The magneto ignition system is ideal for ignition in engines that run at medium to high speeds. However, special designs are required to avoid excessive voltages at extremely fast speeds.
  4. Modern magneto designs use cobalt steel and nickel aluminum magnet metals, resulting in lightweight, compact machines that take up little space.
  5. In recent years, magnetos have improved their low-speed ignition characteristics using modern magnet alloys, making engine startup smoother.
  6. The magneto ignition technology now allows for easy and accurate ignition timing, which improves overall engine performance.

Disadvantages of Magneto Ignition System

The following are the main disadvantages of the magneto ignition system:

  1. The magneto ignition system may generate fewer sparks at low engine speeds, which could make starting the engine more difficult.
  2. In comparison to other ignition systems, the magneto ignition system is typically more expensive to produce and replace its parts.
  3. Magneto ignition systems typically have a more complex half-speed engine driver than coil ignition systems.
  4. The magneto ignition system impacts the entire ignition timing range, and modifying the spark timing can change the voltage or energy produced.
  5. The magneto ignition system is less user-friendly in terms of maintenance since it can be trickier to maintain than other ignition systems.

Applications of Magneto Ignition System

The following are the applications of the magneto ignition system:

  1. Since magneto ignition systems are reliable and self-sufficient, they are frequently found in small engines like lawnmowers, chainsaws, and generators.
  2. Many aircraft engines use magneto ignition systems to provide reliable and consistent ignition during flight operations.
  3. Due to its historical relevance and simplicity, magneto ignition systems are still used in some old cars and motorbikes.
  4. Marine engines for boats and ships use magneto ignition systems because they offer dependable starting in saltwater conditions.
  5. Magneto ignition systems are used by many agricultural machines, such as harvesters and tractors, to provide reliable and effective ignition during farming operations.
  6. Magneto ignition methods are used in several older and off-road motorbike models because of their strong and independent ignition.

Now, let’s discuss how the magneto ignition system differs from the battery ignition system.

Read Also: What is a Continuously Variable Transmission? [Working & Uses]

Difference Between Battery and Magneto Ignition System

Battery ignition systems are popular in modern automobiles, they use a battery to generate electricity and a spark for ignition. Unlike magneto ignition systems, magneto ignition systems make their own electricity by rotating a magnet inside the engine, making them self-sufficient.

Battery systems provide steady and adjustable ignition timing, whereas magnetos are simple and reliable, but less adaptable.

Battery Ignition SystemMagneto Ignition System
A battery serves as the power source for a battery ignition system.In the magneto ignition system, the magneto generates its energy.
The components of this ignition system are the distributor, spark plugs, ignition coil, and battery.The components of this ignition system are the magneto, ignition coil, and spark plugs.
The spark plug in this ignition system uses electrical energy from the battery to ignite the air-fuel mixture.The spark plug in this ignition system uses the magneto’s induced current to ignite the air-fuel mixture.
This allows for the control and adjustment of the spark timing.This features fixed spark timing, which is frequently less adjustable.
The charging system and battery condition affect the battery igniting system.The magneto ignition system is less reliant on outside variables and more reliable.
It needs regular battery care.In general, this system needs less maintenance.
Since there are electrical components, this is more complicated.Because of the self-generating design, this is simpler.
These systems are frequently found in modern machinery and automobiles.These systems are frequently seen in aircraft and small engines.

Conclusion

That’s it. Thanks for reading. I hope I have covered everything. It would be helpful if you could let me know if there was anything I missed or if you have any doubts about anything I wrote.

Please share this article with your friends if you find it interesting.

Want free PDFs direct to your inbox? Then subscribe to our newsletter.

Download PDF of this article:

Read more interesting articles from our blog:

  1. List of 22 Basic Car Engine Parts & Their Functions
  2. A Complete List of Car Body Parts [Names & Functions]
  3. Different Types of Car Lights and Their Purposes

FAQs

What is a magneto ignition system?

The magneto ignition system is a self-sufficient ignition method used in internal combustion engines. It generates high-voltage sparks for engine ignition without the need for an external power source such as a battery.

How does a Magneto ignition switch work?

When the switch is turned on, a magneto ignition switch ignites the engine by turning on the magneto, which produces a high-voltage spark.

What is a major disadvantage of a magneto ignition system?

The main disadvantage of the magneto ignition system is that it requires turning the engine “over” to start it; this makes it non-self-starting.

Nowadays, where is magneto ignition used?

These days, magneto ignition is found in a variety of applications, including small engines, off-road motorcycles, vintage cars, aircraft engines, and marine engines.

About Yousef

He is a mechanical engineering student, he likes to write about engineering stuff and he is really interested in learning about new technology in machines.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.